1. Aemc Megohmmeter

MODEL OXY7102III OXY7104III INTERFACE Screen Specifications Color 5.7″ LCD (115 x 86mm) 320 x 240 – CCFL backlighting Display Mode Vectors with interpolation No. Of Traces on Screen Four traces and four references – Split screen and full screen modes (tracing zone 110 x 74) Front Panel Control 32 direct shortcuts Screen Control Touch screen – “Windows-like” menus and graphic commands VERTICAL Bandwidth 100MHz Channels Two isolated channels Four isolated channels Input Impedance 1MΩ ± 0.5% approx. 17pF Maximum Permanent Input Voltage 600V Cat.

III – Derating -20dB/decade from 100kHz Vertical Sensibility 16 ranges from 2.5mV – 200V/div and up to 156µV/div in verticle zoom mode (12-bit converter) – Accuracy ± 1% of Reading Accuracy ±0.1% of Reading Vertical Zoom Zoom factor: from 1 to x 100 HORIZONTAL Max. Sampling Speed 100GS/s in ETS – 2.5GS/s in Single Shot Mode on each channel Vertical Resolution 12 bits Memory Capacity per Channel “TRC” approx. 10kB, “TXT” approx. 20kB User Memory 2MB Other Modes Envelope mode (Factors from 2 to 64) XY Mode Between two from the four traces – math functions and cursors OTHER FUNCTIONS Autoset Complete autoset 30Hz Trigger Mode Automatic Triggered, Single shot, Auto Level 50% FT Analyzer & Math Functions FT, +, –, x, / – Editor of mathematical functions Cursors Two or three cursors: V and T simultaneous or Phase Resolution 12 bits, display four digits Power Source Rechargeable 9V 3.8Ah battery (included) Battery Life Four hour operation when fully charged Communication Ethernet, RS-232, Web Server. AEMC ®Instruments Model OX 7102-III Cat. MODEL OXY7102III OXY7104III INTERFACE Screen Specifications Color 5.7″ LCD (115 x 86mm) 320 x 240 – CCFL backlighting Display Mode Vectors with interpolation No. Of Traces on Screen Four traces and four references – Split screen and full screen modes (tracing zone 110 x 74) Front Panel Control 32 direct shortcuts Screen Control Touch screen – “Windows-like” menus and graphic commands VERTICAL Bandwidth 100MHz Channels Two isolated channels Four isolated channels Input Impedance 1MΩ ± 0.5% approx.

17pF Maximum Permanent Input Voltage 600V Cat. III – Derating -20dB/decade from 100kHz Vertical Sensibility 16 ranges from 2.5mV – 200V/div and up to 156µV/div in verticle zoom mode (12-bit converter) – Accuracy ± 1% of Reading Accuracy ±0.1% of Reading Vertical Zoom Zoom factor: from 1 to x 100 HORIZONTAL Max. Sampling Speed 100GS/s in ETS – 2.5GS/s in Single Shot Mode on each channel Vertical Resolution 12 bits Memory Capacity per Channel “TRC” approx. 10kB, “TXT” approx.

- Free Download Program Aemc Model 1250N Manual - Baixaki Download Gratis Programa Photoshop Cs5 Portable Em Portugues - Template Skull Cinema 4D Models - Redgate Sql Prompt Keygen - Scaffolding The Handbook Of Estimating And Product. Megohmmeter Models 1210N/1250N 5 CHAPTER 2 PRODUCT FEATURES 2.1 Description The AEMC® Models 1210N and 1250N are compact, self-contained hand-cranked megohmmeters. They are practical and dependable instruments designed for a broad range of plant and fieldservice applications, such as acceptance testing and preventive maintenance of wiring, cables.

20kB User Memory 2MB Other Modes Envelope mode (Factors from 2 to 64) XY Mode Between two from the four traces – math functions and cursors OTHER FUNCTIONS Autoset Complete autoset 30Hz Trigger Mode Automatic Triggered, Single shot, Auto Level 50% FT Analyzer & Math Functions FT, +, –, x, / – Editor of mathematical functions Cursors Two or three cursors: V and T simultaneous or Phase Resolution 12 bits, display four digits Power Source Rechargeable 9V 3.8Ah battery (included) Battery Life Four hour operation when fully charged Communication Ethernet, RS-232, Web Server. Model: M300 Data Acquisition/ Switch System Display Resolution: 480 x 272 TFT LCD Size: 4.3” DC Characteristic DC Voltage Input Impedance: 200mV, 2V, 20V ranges: 10MΩ or 10GΩ (For these ranges, input beyond ±26 V are clamped through 106 kΩ) 200V and 300V ranges: 10MΩ±1% Input Protection: 300V Input Offset Current: 50pA, at 25℃, typical CMRR: 140 dB for 1 kΩ unbalanced resistance in LO lead, ±300 VDC peak maximum. Resistance Measurement Method; 4-wire or 2-wire resistance Current source referenced to LO input Open-circuit Voltage: Limited to 5kΩ, it is considered as Open. RTD Alpha: = 0.00385 (DIN/IEC 751): using ITS-90 software compensation; = 0.00389, 0.00391 or 0.00392: using IPTS-68 software compensation Thermistor Series: 44004, 44007, 44006 General Digital Input/Output (DIO) Port 1,2,3,4: 8-bit, input or output, non-isolated Type: Vin(L) Vin(H) Vout(L) Vout(H) Vin(H) 2.0V 4.8V@Iout=1mA 3.5V 4.8V@Iout=1mA 2.3V 3.15V@Iout=1mA 1.75V 2.35V@Iout=1mA Threshold -0.3V Threshold +0.3V (Level-0.2V)@Iout=1mA T/C Check Selectable per channel. When the channel resistance is 5kΩ, it is considered as Open.

Specifications Power Voltage: AC 100V – 120V, 45Hz – 440Hz AC 200V – 240V, 45Hz – 66Hz Detect the power frequency automatically at power-on, 400 Hz defaults to 50 Hz Power Consumption: 25 VA Max Temperature Range: Full accuracy for 0℃ to 50℃ Full accuracy to 80% R.H. At 40℃ Non-coagulation Storage Temperature: -40℃ to 70℃ Humidity Range: 0℃ to 30℃ ≤95% rel.

Aemc Megohmmeter

Humidity 30℃ to 40℃ ≤75% rel. Humidity Storage: Flash non-volatile memory (internal); USB disk (not supplied) Flash non-volatile memory (internal) 1G Bytes Remote Interface: GPIB, 10/100Mbit LAN, USB 2.0 Full Speed Device & Host (support USB storage device), RS-232 LXI: LXI Core Device 2011，Version 1.4 Dimensions: 159.0mm × 239.0mm × 373.4mm Weight: About 5.7 kg (without package) Safety: IEC 61010-1; EN 61010-1; UL 61010-1; CAN/CSA-C22.2 No. 61010-1 Measurement CAT I 1000V/CAT II 300V Pollution Degree 2 EN 61326-1. All devices are connected automatically upon powering up without configuration, no software required. Compatible with devices running any protocols via RS485 port, e.g.

Accuenergy manufactures 2 transceiver models: the AcuMesh-k transceiver- A Standalone transceiver, includes a 2db whip antenna and power supply. The AMX-Mesh Transceiver Module- with an AcuMesh module that plugs in Acuvim II series meter directly, includes a magnetic mount 2 db antenna with 3-meter extension cable. The Mesh transceiver provides wirelessly transmits data from energy meters and devices with RS485 communication remotely, making it possible to conveniently gather metering data from multiple locations in a building, or multiple buildings on a campus. AcuMesh communication works out-of-box when connected to a meter or other MODBUS device. The automatic self-healing, self-optimizing network allows transceivers to find the optimal pathway for communication where other wireless methods such as Wifi and Zigbee failed to work.

The Mesh transceiver works with any device with a RS485 running any communication protocol. For example, the most common protocol is Modbus. AcuMesh transceiver works with Modbus master, Modbus slave and data acquisition gateway, making the entire network wirelessly connected and reliable. The same compatibility applies to any other protocol running on RS485 network. All Accuenergy meters can directly connect with the Mesh transceiver.

We also designed the transceiver into a modular form that can directly plug-in to an Acuvim II power and energy meter. AEMC ®Instruments DTR-8510 Cat. The 10A Micro-Ohmmeter Model 6240 is a rugged, low resistance tester designed for both plant maintenance and field use. Utilizing a four-lead Kelvin method of testing, the Model 6240 Micro-Ohmmeter accurately measures very low resistance within 0.25%. Resistance measurements are automatically calculated from 1µΩ to 400Ω with resolutions down to 1µΩ. The Model 6240 has selectable test currents of 10A, 1A, 100mA and 10mA and includes a polarity reversal function. The Model 6240 is designed to conduct tests on both resistive and inductive material.

Up to 99 measurements can be stored and printed directly to a printer or from a PC. The DataView® Software included allows you to configure the instrument, temperature compensate the test results, as well as, store data and print reports. AEMC ®Instruments Model 6503 Cat. AEMC ®Instruments Model 6501 Cat. Close.

Close. Close. Close. Close. Close. Close. Close.

Close. Close. Close. Close. Close. Close. Close.

Close. Close. Close.

Close. Close. Close. Close. Close. Close. Close.

I have an A1314 which is the 2-battery version of the A1255. If you have a wired USB keyboard, connect it to OS X, un-pair the A1255 from the OS X side, try to pair it with Windows first and test. If it works, switch to OS X and pair the keyboard to OS X side and test. Boot Camp installs Windows support software (drivers) that let you use features of Apple keyboards in Windows. If your keyboard works when your Mac is started in OS X but not Windows, try reinstalling Windows support software from Boot Camp Assistant.

Close.